Industry Information

Update July 19, 2023

EU releases new textile labeling and marking regulations

The EU's "Official Gazette" published Regulation No. 1007/2011 on the labeling and marking of textile fibre names and textiles. The Regulations establishes labelling and marking...

Update July 18, 2023

What are the characteristics of paint in parking lot marking construction

Various paints will be used in the construction of the parking lot, and the construction of the entire marking line will be completed through various combinations of colors. Because of the frequent...

Update July 17, 2023

Talking about understanding the distinguishing features of lane marking

In the problem of division of parking lane markings, the design and requirements of the construction parties will be different, because the shape of the car is different from the upper and lower...

Update July 16, 2023

Road marking construction requirements and process overview

The application of ambient temperature acrylic acid marking paint is poor, and it cannot be constructed below 5°C. Due to the high flux content, it poses a fire hazard to the construction. The...

Update July 15, 2023

Municipal Road Marking and Construction Requirements of Road Dashing

The main role of road traffic markings is to pass rules, warnings and guidance on traffic in relevant roads. The road traffic markings are mainly set on the road surface, are exposed to the sun,...

Update July 14, 2023

Village road marking hot-melt line construction process

Hot melt line construction process: 1, reflective hot melt marking, using glass beads primer, petroleum resin hot-melt coating. 2. The coating is placed in a hot melter and heated. The melted...

Update July 13, 2023

Garage hot melt marking, construction process of paint line

After the underground garage has been constructed with epoxy floor, roads, parking spaces and indicator arrows need to be marked with yellow paint. In order to ensure the durability of road lines and...

Update July 12, 2023

Gas spring model marking method

Gas spring type marking method ※ The gas spring mark is composed of 1 code, 2 piston rod diameter, 3 cylinder outer diameter, 4 strokes, 5 extension length, 6 rod end fittings and cylinder end...

Update July 11, 2023

The development space for ink jet printers will not be replaced by laser marking

Ink jet printers may not be replaced by laser jet printers First of all, we have to admit the limitations of inkjet printers: We cannot permanently maintain the content of inkjet printers. The demand...

Update July 10, 2023

China's shrinking machine industry needs to develop itself in continuous improvement

With the improvement of science and technology, the industry is more diversified, and the development of shrinking machines has also been greatly affected. It is no longer possible for a single...