Analysis of Common Faults of Horizontal Continuous Sealing Machine

Nowadays, the variety of products on the market, the requirements for horizontal continuous sealing machines are also different, more and more manufacturers are using horizontal continuous sealing machine which is ready for production packaging. If the horizontal continuous sealing machine fails during the work, it will directly affect the production efficiency of the enterprise. Therefore, the majority of horizontal continuous sealing machine operators need to master some simple fault analysis processing knowledge, so that in the encounter When the continuous sealer fails, it can be handled correctly. The following is a summary of several common failures summarized by Shanghai Zhuheng Xiaobian, and I hope to help everyone.

Horizontal continuous sealing machine common fault analysis:

1, there is a bubble failure analysis: the melt is too ripe solution: reduce the flame intensity or reduce the time.

2. Intrusion of the nozzle is very bad. Failure analysis: too much flame inclination. Solution: If necessary, adjust the angle of the lamp, but the angle cannot be adjusted too large.

3, there is a horizontal strip failure analysis: Melt too raw solution: increase the flame strength, if necessary, can extend the time. Die failed.

4. Failure analysis of the tail pipe broken: The tail pipe is not straight Solution: It is forbidden to use the pipe whose tail pipe is not straight 5. Stress analysis: The annealing temperature cannot reach the solution: Increase the annealing furnace flame temperature appropriately 6. Feeding step mechanism Unsynchronized Fault Analysis: Sensor Detection Signal Failure Solution: Check Sensor Sensing