There are many kinds of marking machines and equipments, and there are capacitive marking machines, which are also non-receiving marking machines. There is a big difference between available places and suitable products. Today, it is appropriate to share the Inkjet Printer Coding Machine with everyone. Instructions for use.
1. How to add printing ink to the inkjet printer coder.
First of all, pay special attention to the difference between model specifications and specifications, without adding incorrect. Different types of printing inks and organic solvents that are not compatible with well-known brands and different types of marking machines are all different in specifications. The main secrets are subject to strict testing and preparation by the manufacturer, which meets the requirements of opening and stopping and coding. The ability to create clear content coding software can also ensure the reliability and credibility of the shutdown.
Secondly, the printing ink and the organic solvent tank should be opened separately. It is not necessary to add the printing ink to the organic solvent tank, and it is not necessary to add the organic solvent into the printing ink tank. Generally, the manufacturer will set such a thing. Anti-missing design, that is, the printing ink plus the mouth and the organic solvent plus the mouth specifications are not the same, not the paired consumables can not be added.
In the end, it must be appropriate to add printing ink or organic solvent. After the equipment alarm light is on, people have to determine how the police report is, whether the printing ink is low or the organic solvent is low, and then according to the reminder, plus Only on each bottle, remember not to add too much, causing fullness, resulting in extravagance and waste.
2, inkjet printer coder how to write content and how to load paper
The commonly used marking machine uses the WYSIWYG operating panel, that is, the information content seen in the information content box on the display screen and the actual coding software information content are matched with each other, so that we can together Simple and clear to know the status of the device to print information content. First of all, people must establish the wonderful content of the information content that must be printed, including English, big numbers, marks, lines, etc. For example, if there are four big numbers, people must first create a 28-point information content box. In the 28-point information content box, the line-by-line writing is carried out, and the aspect ratio of the information content of each line is set to 7 dot matrix only.
Secondly, people have to make sure to read it after the information content is written, and then carry out the actual operation of withdrawing the storage. Taking the Kinglee Q50 as an example, people must sell the SHIFT button and sell it by pressing the F1 button (SHIFT+F1). , to withdraw the storage.
Finally, after the information content is written, people must adjust the main parameters according to the actual size of the product, such as the total width, precise positioning of the delay time, rotation, etc., to ensure that the logo can accurately code the specific parts of the finished product. Then carry out the burning. When inkjet printer coders are used in production lines and production lines, it is inevitable that they will encounter various problems. How to properly apply the actual operation becomes a key issue for processing plants and manufacturing.
Article source address: http://
